Bullet - secret hide

The outer thread of the tip is slightly smaller than the inner. But I still recommend reducing it to 90% (or less)in Prusaslicer. 

it is difficult to screw. I print with a 0.6 nozzle, but I recommend using 0.4

***Corrected***

• to choose a new tip
   
• Previously, the slicer tip had to be reduced for the thread to work properly. Then the outer diameters were not in one plane. Now the threads are adjusted and you can print everything 100% - the file “complete.stl”
• this time I pushed with a 0.4 nozzle - for better results