Marlin | Foam Dart Crossbow Blaster

Overview:

• Super Low Hardware

• High performance due to long draw 

• Different versions for longer or shorter layouts

• Included Iron sights and grip to help you prime

• Single shot breech loader - Can take full length darts (Please be aware that these darts will perform extremely poorly or just outright jam when accelerated this violently, if you wanna use them, consider using less string tension)

Printing and hardware:

• Tested with three walls and 20% Gyroid infill, no supports

• If you dont fully trust your filament print load bearing parts (PrimeFrame, Grips, Bowlimbs and Primebars) with 5 walls

• 4mm elastic string required (this stuff), 5/32 Works too. Keep in mind there is a lot of variation between different strings.

• Weight: 690g at the heaviest configuration, about 480g at the lightest

• Will fit on a 180mm³ Printer (that means it fits on a A1 Mini or prusa mini), if you angle certain parts diagonally on the plate.

Showoff:

Assembly guide: