Ada's Dream Deluxe Edition Board Game Insert

If you want, you can help me with designing inserts by donating here:

https://www.paypal.com/donate/?hosted_button_id=J2YS7MREH8MU8

Hello,

for those that don't know my ‘insert philosophy’ - I am creating modular inserts that are focused on reducing setup and space on table, filament consumption is not my highest priority, but of course I'm trying to save some material where I can.

Important Notes:

• If you want to acquire commercial licence for this model, visit my club page on printables,

• Clearence for holder covers is very small - 0.2mm horizontal. Please print the smallest holder and cover for it to check if it fits, if not you may need to calibrate printer or enlarge cover a bit (adding 0.2-0.4mm to the width in the slicer should be enough),

• card holders - they're very tight, so in order to put all cards you may need to squeeze them in, just put most of the cards in and when you have trouble adding more - one side of the holder (front one) is shorter, so you can put cards on top of the cards that are in the holder, squeeze them a little and then you will be able to fit all cards.

Supports:

• vertical storage,

• deluxe edition,

• metal coins,

• sleeves - this is mainly design for 70 microns sleeves (I use Sloyca). Card holders are pretty tight, so you won't be able to squezze thicker sleeves without adjustments.

This insert features:

• player components holder - everything that player needs during setup,

• setup components holder - for everything needed during setup,

• books holder - take it out and put it on the board,

• cards holders - take it out and put on the table or board,

• program addition gears holder - take it out and put it on the board,

• resources coins multiplication gears holder - take it out and put it on the board.

Requirements:

• about 414g filament needed, (depends on your settings, I printed with 12% gyroid infill, 2 walls, 4 top and 3 bottom layers, 0.42 line width), 

• at least 200mm x 80mm print bed (maybe lower if you rotate the holder).

Instructions:

Supports - no supports required.

• every file ended with xX (for example x16) - print X times (in given example - 16 times),

• every file ended with VARIANT - it's another variant for the model with the same name but without _ ending, only one variant is required to be printed,

• refer to pictures how to organize the box.

What future holds:

• I think this insert is finished.

Enjoy!