Voidfall: Revised Player Tech Stands

After more plays of the board game Voidfall I have revised my Player Tech stands for the triple-layered House boards with three improvements:

1. Table space is at a premium in this game, so the right Player Tech stand now has a slot to put the player's discarded Focus cards.

2. More than once I forgot that I already had the Improved Tech card available to add for my starting Tech because the card was just laying on the table by my board. The leftmost Tech slot on the right Player Tech stand now has a piggybacked slot behind it. The starting Basic Tech goes in front with the Improved Tech card behind, peeking out as a little reminder that it is there.

3. On the left Player Tech stand I added one more Tech slot, ready for when a player has taken over a Fallen House sector. There is also an insert that is put in to block the slot until that happens.

The stands are designed to hold sleeved cards (Gamegenic Mini European).

Follow Up Note:  There is room in the Player Component Tray I have designed for the Fallen House Insert to fit!

Print Settings

Printer Brand:

Creality

Printer:

Ender 5

Rafts:

No

Supports:

Yes

Resolution:

Stands: 0.8 mm Nozzle; 0.2 mm Layer Height. Fallen House Insert: 0.4 mm Nozzle; 0.1 mm Layer Height

Infill:

20%

Filament: eSun; Hatchbox; Sunlu; Polymaker PLA Light Blue, Yellow, Gold, Fire Engine Red; True Green; Magenta; Steel Grey, Metallic Blue

Notes:

The Player Tech stands were printed with one filament swap and support under the tabs that sandwich the triple-layer House boards. The Fallen House Inserts were printed with three filament swaps.

How I Designed This

The stands were designed in Fusion 360 and exported as .STL files to MeshMixer. The Fallen House icon was created by taking a picture of the back of one of the cards, editing the image in Photoshop, and then using Inkscape. The .SVG files were then uploaded into Fusion 360 for extrusion.

Category: Games