Tabletop Inc Deluxe ALL IN insert / organizer

If you want, you can help me with designing inserts by donating here:

https://www.paypal.com/donate/?hosted_button_id=J2YS7MREH8MU8

Hello,

for those that don't know my ‘insert philosophy’ - I am creating modular inserts that are focused on reducing setup and space on table, filament consumption is not my highest priority, but of course I'm trying to save some material where I can.

Important Notes:

• If you want to acquire commercial licence for this model, visit my club page on printables,

• my inserts are without lid lift unless I specifcally state otherwise,

• Clearence for holder covers is very small - 0.2mm horizontal. Please print the smallest holder and cover for it to check if it fits, if not you may need to calibrate printer or enlarge cover a bit (adding 0.2-0.4mm to the width in the slicer should be enough),

• card holders - they're quite tight, so in order to put all cards you may need to squeeze them in.

Supports:

• vertical storage,

• deluxe edition.

• wooden tables,

• golden pear expansion,

• crowdfunding revolution - I've left space for playmat, award tokens, boxes,

• sleeves - this is mainly designed for sleeves from campaign, I think they're around 70-80 microns

This insert features:

• boxes holder - stores all boxes (and tokens from the golden pear expansion inside boxes) and there is space left for boxes from crowdfunding revolution,

• resources, stands, standees holder - for all resources, standees (unfortunately they're not stored assembled) and stands. You can also store coins there, but I prefer to store them in the bag, which then goes into the shelf,

• cards holders - separate holders for items, objective, specialists, skills. 6 holders for cards for each player, one holder for everything else setup related,

• mechanism, component holder,

• tables, pear, award, convention tokens holder - there is space left for award tiles from crowdfunding expansion,

• easels, player components, other holder

Requirements:

• about 682g filament needed, (depends on your settings, I printed with 12% gyroid infill, 2 walls, 4 top and 3 bottom layers, 0.42 line width), 

• at least 241mm x 221mm print bed (boxes holder needs to rotated 45deg).

Instructions:

Supports - no supports required.

• every file ended with xX (for example x16) - print X times (in given example - 16 times),

• refer to pictures how to organize the box.

What future holds:

• I will probably update easels holder when the expansion comes, to store all other tokens from expansion there. I may also need to update setup cards holder.

Enjoy!