March 2, 2026
Description
No supports needed in the provided orientation. Parts’ suggested colors are in the file names.
For assembly some light sanding, glue and, clamping work well. I would not recommend gluing the peg in place, it’s the most likely part to break or wear and it works fine as a friction fit. A dry film lubricant on the inside of the propeller can help it to spin more freely.
Support free burger designs are available at the following:
https://www.printables.com/model/1399155-high-resolution-calibration-burgers
https://www.printables.com/model/208789-burger-ministers-for-wedding-cakes
https://www.printables.com/model/165263-calibration-hamburger
https://www.printables.com/model/172207-calibration-cheeseburger
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Grossmiller
