Dodgy Lids for "After Us Board Game 3D insert"

I liked the "After Us Board Game 3D Insert" by Silverhawkminiatures from MakerWorld, but I wanted lids. Loose resources make me nervous as my friends will calously flip over the box to see the back.

The lids are 1mm thick, but that still has an impact on fit in the box. It adds 1mm to the height and 2mm to the width and length. If you print 6 player lids, you need to bend the cardboard insert just a smidge to get a cleaner fit. If you prefer you can print 3 lids for just the top player bins. Due to the slightly slanting sides of the box insert, it fits without bending anything.

The resource lid also fits the battery box.

Also, I didn't have a problem with an additional 1mm height on the resouce bin or the additional 2mm height on the player boards (if you print all 6). If you have any concerns, you can use the slicer to adjust the Z height of the spacers by 1mm or 2mm to compensate.