Insignia Display Stand for Transformers Dead End and Drag Strip

Continuing with the WFC Insignia inspired flight stands, here's the next one for these two Stunticons - Dead End and Drag Strip!

These work similarly to the previous ones and utilize the same twin peg top piece to attach onto the underside of these two. This insignia denotes a Decepticon Ground Infantry Raider, very fitting ranks for our duo right here!

As before, the arm will need to be assembled, giving the entire setup 3 points of articulation. From here, both of these bots can be attached on using their twin 5mm ports fitting into the corresponding 5mm pegs on the stand.

Once in place - they can be freely posed into any dynamic angle you like!

=== Assembly ===

The included diagram shows the parts which comprise this build. You will need a M3x10mm bolt, a M3x14mm bolt and a pair of corresponding M3 nuts for them.

===

Have fun with more alt mode posing options for Dead End and Drag Strip; happy 3d printing! =)

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com/)

Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog