Tape Ejection Effect Part for Transformers SS86 Soundwave

Here's the next addon kit to bring some dynamism to SS86 Soundwave!

The first thing we tried to improve was to see if we could create a more solid colored tapedeck chest when none of his mini-cassettes are loaded.

So this is simply a modeled to tape-size piece, which you can print in any color - we've chosen light purple here. And here's how it looks like after its in place! Don't forget that the clear blue tint of the chest will also influence the look a tad.

Next, we come to using two of the addon pieces to bring some dynamism to the scene! And from there, you can attach either lazerbeak or buzzsaw using their rearward facing peg to give it a launching look!

The other alternative piece which can be used is a the rectangular clamp one, where it can be left unbent and snugly attach the mini cassette mode to have them in their "just ejected" look! And in a very short pinch, you can actually balance ravage with his hind quarters in the same clamp piece - in a sort of leaping out pose!

=== Assembly===

This kit just has the three parts to it, and the peg version needs to be heated slightly with a lighter, to allow it to bent and face forwards.

===

Hope this little kit would be a fun one to help add some dynamic posing options for your SS86 Soundwave and his mini-cassette pals. Happy 3d printing! =)

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com/)

Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog