March 27, 2026
Description
Hey everyone! I’m excited to share this fun articulated frog model with you.
The frog features smooth articulated joints that allow the legs to move naturally, making it great as a desk toy, display piece, or something fun to sell as a physical print. The wide feet and expressive eyes give it that classic tree frog look that really pops when printed in bright colors.
Colored version included in downloads just it is prepared for Bambu AMS.
⚠ Note:
The model is optimized for printing at the provided scale. Scaling it down too much may reduce the clearance in the joints and affect how well the articulation works. If you resize it, do so carefully and test first.
Also make sure your print bed is clean and properly leveled to ensure good adhesion, especially since the model has multiple contact points.
🖨 Recommended Print Settings
Layer Height: 0.15–0.2 mm
Infill: 10–15%
Perimeters/Walls: 2–3
Supports: Not required - model comes with premade supports.
Material: PLA recommended
Orientation: Print flat on the build plate
💡 Printing Tip:
After the print cools, gently move each leg to loosen the joints. They should articulate smoothly once flexed a few times.
License:
Standard Digital File License
KOGI3D
