Miniature table tennis paddles

The idea was to create a scaled down table tennis table as a special gift. I found a good model here on printables, but it needed some treatment for this special mission.

Its obviously scaled down, then the logo is removed (it was simply not printable) and model is cut in pieces. It was a bit of fiddly work to do so, so I decided to publish my work as a remix. All credits go to the great original model!

Print instructions

• layer height: use finest you can make. at least 0.1mm
• Filament I used: Polymaker polyTerra PLA Peanut and Lava Red
• “Handle”: use wooden like filament (Peanut)
• “Paddle”: print first 2 and last 2 layers with red filament (or one with red and other with black/blue), middle layers with wooden like filament

Post Printing

glue handle parts onto the handle of the paddle. Pay attention where is bottom and top (see file names). I used UHU “Hartkunststoff” glue, but any othe plastic/super glue will do.

Additional notes

I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.

If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.

In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.

Hope you enjoy my models.