April 10, 2022
Description
My kids got these toys, but they only come with one projectile. Five minutes after getting it out of the box, my daughter promptly lost hers. My wife and I used my son's as a model and created a replacement. After several revisions, it works!
The tolerances on these are TIGHT. For best results, print at .12 quality and sand down any leftover support components so it fits correctly and is symmetrical.
I had some issues with bed adhesion, so ended up printing on rafts, but that isn't necessary if yours adheres fine.
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Yes
Supports:
Yes
Resolution:
.12
Infill:
30%
Filament: Hatchbox PLA Red
Notes:
Print laying flat at .12 or better. Tolerances are pretty tight, so you may need to sand down any leftover support components so it fits.
I used 30% infill and had no issues, you can probably go lower.Sanding
Sand off any support parts
License:
Creative Commons — Attribution
iyersmith
