Tekhenu deluxe insert bits +sleeves +box to table +Low PLA +side storage

f you like/print this insert/content, please follow me and “like” my insert :)

This is an all-in Deluxe insert for Tekhenu.  

Key features:  

Box to table => all resources, and etc, are able to be set right on table for use (no resources laying on table or need for any trays).

Low PLA => during the creation, I tried to minimize PLA use.

Sleeved cards => small cards are sleeved.  Player aids can be sleeved with sleeve kings, but the top of the sleeve will need to be trimmed just a bit to fit.  There may be other sleeves that are a bit shorter that would work.  If you don't sleeve player aides (I do sleeve them), you will have no problem.

Deluxe bits => We added all upgrades to our game and it will hold the upgrades (3D printed and metal).

Side storage => This insert may be stored flat, upside down, or on the side.  I use velcro strips to secure the box lids, but box bands will work as well (if you store on the side, just to keep the lid closed).

Each plate has a description, and for the most part AMS and non-AMS lids are on the same plate as the tray.  You can choose what you want to print.

The tower (base side) has the bag folded under it.  The “moniker”, which is my initial, can be placed above the folded bag, and is recessed so that it doesn't go above the rest of the trays.

There are 2 dials and one expansion cardboard piece, and these can be placed on top of the trays (see location) or under them (I placed them under).   They will fit in the area where you see them.  The rest of the trays are a bit higher and are only designed to have the rules above them.

I went through the plates, to make sure that the latest version of all the models were there.  Please send me a message if you run into any printing issues, and I will immediately correct and update the models accordingly.

Just as a reminder, you will not need to print the AMS and non-AMS lids (both), just delete the one you do not want to print.

Send me questions.