Red Herring Full Stock For Bolt Primed Configs

A stock that allows bolt prime red herrings to properly get a stock hold and to be able to prime the blaster while doing so. 

There is 4 4-40 screws to secure the buttplate. 

The 4 screws that secure the stock to the rest of the blaster needs a long screw driver. 

You need to remove the old buttpads to install this. 

Pictures are included to give a rough guide on what is supposed to go where. 

Pairs well with the reinforced bolt mod I posted here as well. 

Hardware-

The 4 holes that secure the stock can use either #6 screws (like the original, but needs drilling to widen the top 2 holes on both sides)  or 3/4 inch #4 4-40 screws (like mine is but the screws are a super weird ass size) You will need to tap 2 new holes for the top screws (easy with coarse threaded screws that start it for you). 

2 extra 4-40 3/8 screws (the standard slug ones)

A decent length of 3-32 elastic

A long boi screwdriver (8+ inches)