Surfboard and Basketball for Transformers SS86 Optimus Prime

To help keep our robot pals in shape and have some fun here's some sporting equipment in the form of a surfboard and basketball for Optimus Prime. Though his other comrades can certainly make use of them too!

First up - here's the surfboard, sized to be slightly taller than Prime himself. As there are fins on its underside, we've also done up an accompanying stand which can magnetically hold the surfboard horizontally.

It might take a little bit to balance Prime atop the surfboard but bot can he ride some waves with it!

Aside from Prime, we've also seen other Autobots take to the waves with the board, so here they are having their turn too!

The other piece in this set is the basketball, which we've seen Prime dribble around in the G1 series.

Needing the right articulation and also hands which can open, this one might be a little more restricted to use for Prime. Some poses might be a little more tricky but with a bit of balance, Prime can still dribble around and do a dunk with it!

=== Assembly ===

The included diagram shows a look at all the parts for this set and how they are to be assembled.

Both pieces have been split in half for easy vertical printing, and can then be super glued using the provided pegs for alignment.

The optional magnets required to allow the surfboard and its stand are 5x3mm rare earth ones.

===

So hope you'll enjoy outfitting your bots with these wacky sports equipment from the good 'ol G1 days too - happy 3d printing! =)

===

This model is not to be uploaded or sold in any form and is intended for personal use only.

Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com/)

Support us on Patreon - https://www.patreon.com/FunbieStudios | Full listing of Models - https://funbiestudios.com/model-catalog