May 1, 2026
Description
My younger kids have been fascinated with Subnautica since seeing my older boy play it. Everyone in the game seems to have left behind a PDA with clues in it. This toy is designed to allow standard 3"x5" note cards to slip-in as a custom screen. There is a pouch below the main screen to carry additional 3x5 cards. It's not intended to look like anything in the video game.
There is a single color STL that is designed to allow the button symbols to show up if you want to print without an AMS. I recommend printing a single-color device upright with the slots at the top. It will be much easier to clean out the supports than laying it on its back like I did with the four color print.
NOTE: If you do the four-color print, the screen card slot is only 1.2mm tall. I had to use a razor to get all the supports out. You can print it upright, but t will change colors every layer and take a lot longer.
Category: Toy & Game AccessoriesLicense:
Creative Commons — Attribution — Noncommercial — Share Alike