April 23, 2026
Description
A friend asked me to do a repaint on a messed up Spider-man 2099 Bobble-head. I'm a huge fan of Spidey 2099, so I had to try and do it right. The templates helped get the basic shape for the mask and chest on the figure, but it is 90% hand painted.
Edit: 1/14/16
Project is complete! I'm pretty happy with the way this turned out.
Printer:
XYZ Da Vinci 1.0
Rafts:
No
Supports:
No
Resolution:
0.1 - 0.3 (depends on the part)
Infill:
20%- 90%
Notes:
I printed the webcape at 0.1 layers and 90% infill. It is a very thin part because I wanted it to be somewhat flexible. I printed it in Hatchbox Glow-in-the-Dark ABS.
The Arm spikes and everything else has been printed at 0.3 layers and 20% infill.
Arm Spikes
I placed two arm spikes on a flat base that I thought I would glue directly to the model. It was too big, so I removed it and pinned the spikes to the arms.
I used Solid Works for all the parts. I used the above images (which I have no rights to) for inspiration.
Category: Toy & Game AccessoriesLicense:
Creative Commons — Attribution — Noncommercial — Share Alike
brimstone326
