Hydra | Foam Musket blaster with swappable barrels!

You can get a set of hardware here

Overview:

• Musket look and feel, Prime the blaster with a ramrod and then ram the projectile into the barrel!

• Twist lock for the barrels and the ramrod

• Barrels for Elite, Mega, Rival and MegaXL darts

• Optional tacticool frame with picatinny stock and AFG

Printing and hardware:

• 180mm³ Printer required, you may have to angle long parts by 45° on your buildplate

• Print settings are labeled on their respective folders. No supports needed

• The folders labeled Color(A,B,C/C) will get you a finished rifle stock musket. if you want to look into the other options check if they replace parts and you may save yourself some filament.

• 4mm elastic string required (this stuff) (5/32" will work too)

• Filament use for a stock blaster (None of the optional parts and just the elite barrel):

  Color	Amount
  ColorA (Barrel/Trim)	440,51g
  ColorB (Frame and stock)	385,35g
  ColorC (Orange)	293,93g

• Optional Hardware:

  Part	Amount
  Polycarbonate Tube, OD 1-1/2", ID 1-3/8"	145mm (Talonclaw length)
  #016 Oring (Face Seal)	1
  #123 Oring (Plungertube&Plunger Seal)	3

Showoff:

Assembly guide: