April 26, 2026
Description
Minimum print area height: 25cm Total length after assembly: 63cm
Each STL file specifies the numbers of it needed for the final model (ex: x2, x4, etc)
Recommended print settings:
Layer height: 0.2mm
Perimeter wall count: 3
Lightning infill with 15-20% density
Bottom & Top layers: 5
Elephant foot compensation: 0.1mm, 2 layers
No raft, for smoother bottom surface (where the hull sections meet). Use skirt to prime initial layer flow.
Use snug supports only for the cargo hatches, bridge wings, top deck vents, the wave deflector on the bow, and the "SS America" version of the rear kingpost base.
Use the connector pins and glue to join the hull sections and funnel caps to their bodies.
License:
Creative Commons — Attribution — Noncommercial
Avil3D
