Wingspan Dice Nest Tray — Twig-Clad Bird's Nest Dice Tray

A dice tray for Wingspan (or any board game with d6/d8 dice) shaped

like a woven bird's nest on the outside, with a clean rectangular cavity

on the inside. Drop your dice in, they bounce off the smooth interior

walls and stay contained for reading from above.

• Outer dimensions: ~110 × 60 × 34 mm (plus the twigs sticking out)

• - Inner cavity: 100 × 50 × 30 mm — fits a fistful of dice comfortably

• - 600 short cylindrical "twigs" of randomised length, yaw, and tilt

•   cover all four outer walls — every twig has solid attachment to the

•   structural shell (no floating geometry)

• - Prints standing up with the cavity opening at the top — every

•   twig is a short horizontal cylinder against a vertical wall, so no

•   supports needed

• - Parametric: n_twigs, twig_len_minmax, twig_d, cavity

•   dimensions all live at the top of dice_nest.scad

Photos: printed in black PLA, 0.2 mm layer, 3 walls, 15 % infill,

no supports — ~3 h, ~80 g.