May 14, 2026
Description
A simple front grip with a rail section, so you can attach your accessory of choice.
You will need a single M3 x 35mm socket head bolt.
For the best mix of robustness and flexibility, I recommend you print it in PETG.
The model is already oriented for optimal printing, resist your urge to turn it around.
Print Settings:
Layerhight: 0.2mm
Perimeters: 5
Top Layers: 6
Bottom Layers: 5
Infill: Grid
Infill rate: 30%
Supports only under the hollow section at the foot of the printbed.
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
Mücke
