April 13, 2022
Description
Three pieces required as couldn't get supports to work. Simply glue the pieces together to complete. Fit's mBot NEO pattern on top of controller.
I printed the top hat topper with 50% infill and that was overkill. 20% would work much better. So time and material estimates are again overkill.
Top Hat connector pattern and diameter for the mBot is a little undersized at 0.17" dia. Should be 0.18" dia. My mBot interface holes are inconsistent at 0.19" to 0.20" diameter and my printer is dimensionally off by +0.007" at this size. So scale or adjust as needed.
License:
Creative Commons — Attribution — Noncommercial
Bluesdude465
