Wingspan Twigs Nest — Stadium-Shaped Bird's Nest Dice Tray

A stadium-shaped woven-twig dice tray for Wingspan (or any

board game with d6/d8 dice). Sits next to its rectangular sibling

the [dice nest tray](../dice_nest/) — same twig-bundle aesthetic,

but the twigs sweep continuously around an oval/stadium perimeter

instead of stopping at four discrete corners, and the inside is a

shallow saucer with a textured floor instead of a deep rectangular

cup. Looks much more like a real bird's nest.

• Outer footprint: ~134 × 89 mm (twigs included)

• - Rim opening (interior, top): 110 × 65 mm — comfortably fits a

•   fistful of dice

• - Saucer depth: ~9 mm (shallow on purpose — dice settle but stay

•   visible without leaning over)

• - ~1100 randomized perimeter twigs (per-twig diameter, length,

•   yaw, and tilt all jittered); each is solidly attached to the

•   structural shell — no floating geometry

• - ~800 randomized inner pillars form a textured saucer floor

•   that fades flat-to-floor at the centre and ramps up to a flat rim

• - Prints standing up with the saucer opening at the top — no

•   supports needed

• - Parametric: n_perim_twigs, n_inner_pillars, ixiyiz,

•   bowl depth, twig length range — all live at the top of

•   twigs_nest.scad. Override with -D 'ix=130'etc.

Photos: printed in woody-brown PLA, 0.2 mm layer, 3 walls, 15 %

infill, no supports. The brown filament reads most nest-like; black

or grey work too.