Nerf Compatible Blaster Stock — Modular Truss Design, Standard Stock Lug Compatible | STEP File Included

A lightweight but rigid stock attachment for foam blasters with a standard stock lug. The open truss structure keeps weight down without sacrificing rigidity — designed to look as good as it functions.

Prints in 3 separate files — mix and match colors freely without any multi-material unit. Just print each part in whatever color you want and assemble.

Compatibility: Fits standard foam blaster stock lugs. Not compatible with spring-powered blasters due to differences in their stock attachment point design. Check your blaster's lug type before purchasing.

Included files:

• Print-ready STLs (3 parts)

• STEP file for modifications

Print Settings:

• Material: PLA

• Walls: 5 — critical, do not reduce. Thin geometry relies on wall count over infill

• Infill: 100% Grid for brace section, 20% Cubic for attachment point and stock pad

• Supports: No

• Layer height: 0.2mm

Notes: Wall count matters more than infill here — the truss geometry is thin in places and walls are what carry the load. Do not print the brace with sparse infill.

Spring-powered blaster compatibility may come in a future version.