Powerful Rubber Band Gun V2! - 2 Hour Print Time - No Hardware - Easy Assembly

    This rubber band gun is a highly functional and easy-to-print gun, perfect for people looking for a fun and simple project. Created with efficiency in mind, this model requires minimal filament and can be printed in under 2.5 hours on an AD5M 3D printer.

  Key Features:

- No Additional Hardware Needed: All components are 3D printed; no glue or extra parts required.

- Quick Print Time: Complete the print in less than 2.5 hours.

- Efficient Material Use: Designed to use minimal filament without compromising functionality.

  Print Settings:

- Supports: Tree supports are recommended for minimal material usage.

- Infill: Set between 15-20% for optimal strength.

- Ironing, Brim, and Skirt: All should be set to Off.

Compatible Filaments: Suitable for PLA, PLA Pro, HS PLA, PETG, PETG-CF, and similar materials.

  Assembly Instructions: 

  Assembly is straightforward. Remove the supports carefully and snap the pieces together. If you encounter difficulty removing the supports from the front body piece, use a small, sharp tool to assist. Finally, attach the gun handle to the front body piece, ensuring it is oriented correctly, and then snap both body pieces together.

  This rubber band gun model may not be the best in looks, but its reliable performance makes it a great addition to any 3D printing collection. Relish your printing!

How To Load/Reload

    To reload the gun, start by finding some good rubber bands. Hook one end of the rubber band to the front of the gun's body. Then, pull it back, starting from the bottom of the back of the gun and building it up to prepare for firing. When you’re ready to fire, push the rubber bands off from the top, not the bottom. Repeat this process to reload.

If you like this model, consider giving a tip to support Fonn Prints and help us with future models and more!