MTG — +1/+1 Counter Die (d6, +N/+N Faces)

A simple 16 mm six-sided counter die (d6) for *Magic: the

Gathering*. Each face is engraved with +N / +N — power /

toughness — for values 1 through 6. Opposite faces sum to 7

(1↔6, 2↔5, 3↔4) following standard d6 convention.

Two-colour Bambu AMS friendly: drop the STL into Bambu Studio,

right-click → Split to Parts if you have the multi-solid version,

or just print solid + accept a single-colour engraving.

Print settings

• Bambu Lab P2S or any 0.4 mm FDM

• - 0.2 mm layer height, 3 walls, 15 % infill

• - PLA Basic

• - No supports

• - Print on the bed (any face down) — engravings are 0.9 mm deep so

•   they bridge cleanly even on the down-face

Fan content for Magic: the Gathering by Wizards of the Coast —

not affiliated.