Dummy 13 Daedric Warrior

„They say you do not simply forge this metal – you subjugate it. Daedric Armor is no mere suit of protection; it is a nightmare pressed into form, born from the unholy union of black ebony and the heart of an immortal. That armor is never truly cold. It pulses with an ominous, reddish shimmer, reminiscent of the distant glow of the planes of Oblivion…“

To make the Dummy 13 Daedric Warrior, I used the original Dummy 13 by @soozafone , the Dummy 13 Black Knight by @Meowcraft , the Skyrims Daedric Model / Armour Suit , Weapons by @Jace1969 and the simple grip hands by @NigelW_4203 . As usual, all links can be found in the model origin section. Thank you guys for sharing your stuff!

As with all my knight models, I tried to stay as close to the original as possible. Unfortunately, this also means that the figure's articulation is somewhat limited in certain areas. However, this can be counteracted somewhat by printing parts of the armor in TPU (e.g. the tassets, the crotch- and backplate).

To mimic the reddish shimmer of the armor, I used a black and red dual-color silk pla filament.

Note: I'm not a professional 3D designer and only do this in my free time. I've tried to make sure all the parts fit together well, but since every 3D printer is different, you might need to scale some parts up or down slightly, or do some minor post-processing. Don't hesitate to use glue if parts don't stick together.