Xshot MPP "Phlegethon" Barrel Shroud

Another barrel shroud option for the Zuru XShot Motorized Piston Pump, this one based off of Trigger's rifle from the game Zenless Zone Zero. The design has been adapted to the MPP with some alterations, such as the addition of Picatinny rails on the top and bottom to improve functionality. The shroud is affixed to the MPP with a hidden locking shoe tightened from the top. The shroud is split into two pieces to aid printing and painting. 

Hardware: 
2x #8-32x1/2" Screws
(Optional) 1 small segment of rubber, such as cut from an inner tube or rubber bands

Print Settings: Print everything with -.1mm horizontal expansion to improve ease of installation. Shroud should be printed standing up, supports will be needed for the rails. 

Assembly Instructions:

1. Affix rubber to the lock the side facing the blaster using adhesive

2. Insert lock into cavity inside the shroud. Sand if required, but it should go up and down smoothly but not have front to back play

3. Screw on shroud insert into one of the three holes, depending on desired length

4. Attach shroud onto MPP, insert screw into hole on top of shroud to tighten lock down