unsinkable speedboat (vase mode)

To make printing in vase mode possible, I modified the back of the original model considerably

A vase-shaped print.

I use this as a test print. After printing, it can be used as a toy.

The model is designed for printing in vase mode. This type of printing does not use infill or supports. The model consists of only one wall—if printed correctly, it will last a long time. Its strength can be increased by using a larger nozzle, e.g., 0.6 or 0.8. However, I have also had good results with a 0.4 nozzle.

I recommend printing with PETG