May 10, 2026
Description
After printing NAM3Designs original "Fidget Squeezer" my kids and I were hooked. It’s a great haptic toy, but one thought kept spinning in my head: "What if this could actually spin?"
So, I redesigned it to give you the best of both worlds!
Integrated Spinner Function: Hold it, squeeze it, and now – spin it! The added hubs transform the squeezer into a high-satisfaction fidget spinner.
Anti-Jam Design: I added a custom spacer pin that snaps into place. This prevents the mechanism from "over-angling" and getting stuck when pushed flat. No more fiddling to get it back into shape!
Print-and-Play: Optimized for PLA. No supports needed.
Layer Height: For the best results and the smoothest spinning action, I highly recommend a layer height of 0.12mm. (0.2mm also works, but 0.12mm makes the surfaces much cleaner).
Infill: 15–20% (Grid or Gyroid recommended for stability).
Supports: None.
The assembly remains as simple as the original. The new Spinner Hubs and the spacer pin just snap right into place.
What you need:
1x Spin'n'Squeeze Body
1x Spacer Pin
2x Spinner Hubs
1x Durable rubber band (standard size)
Credit to NAM3Designs for the brilliant original concept.
License:
Creative Commons — Attribution — Share Alike
Stele
