1/3 Scale Federal Signal STL-10

PHOTOS ARE FROM ThatSirenEnthusiast and sirensofcentralohio. Thanks to them and making this project working!

MORE MOUNTS, MOTOR COVERS, AND HORNS WILL BE ADDED SOON!

WHAT YOU NEED!

Wheel Weights: https://www.amazon.com/gp/aw/d/B06XDHXRT7/?_encoding=UTF8&pd_rd_plhdr=t&aaxitk=37cac29260f40800f8e7b3d1c3e7222a&hsa_cr_id=6871384830801&qid=1772

Shaft Coupler: Amazon.com: uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector for 3D Printers, Motor Accessories,Blue,2pcs : Industrial & Scientific

Capacitor: Podoy Ceiling Fan Capacitor CBB61 8uf 2 Wire for Compatible with New Tech 250VAC 50/60H: Amazon.com: Industrial & Scientific

Samsung DE31-00029H Motor

M3 and M4 Screw Sets.

Directions:

1. Print your designated motor cover and assemble it to your motor (Demetrius's Motor Covers have directions!):

   1. Northwestern (ADDED TO THIS PAGE)

2. Print the stator and rotor. Onward, apply the shaft coupler within the rotor, then superglue the square holes IN the bottom of the rotor, and apply the weights.

3. Screw in the stator on the motor cover (Demetrius's motor covers use inserts). Then, sand down the rotor before it is inserted in the stator.

4. Print the intake. Then, screw it on the stator AND MAKE SURE ITS SECURE TIGHT!

5. Print 7 Horns and screw them in on each port to make a good loud output (of course)

6. lastly, choose your selected mount and print three. and the pole stop AND YOU HAVE AN STL-10!

Need help? contact me on discord! My user is YourAVGSirenEnthusiast and shoot me a dm!