Domino Set — Double-Six (28 tiles), 2-Colour Engraved (OpenSCAD)

Double-six domino set — 28 tiles, two-colour

A complete double-six set: 28 tiles, every face combination from

(0-0) up to (6-6), printed flat with engraved pips and centre line.

Tile dimensions

• Tile: 36 × 18 × 5.5 mm

• - Pip: Ø2.4 mm, 0.8 mm deep

• - Centre line: 0.6 mm wide, 0.8 mm deep

• - Pip pitch: 4 mm

What's in the bundle

• combined.stl — all 28 tiles in a 6×5 layout, encoded as a single

•   ASCII STL with two named solids body+ pips). Drop into Bambu

•   Studio → Import → right-click → Split to Parts for automatic

•   two-colour assignment. This is the print-ready primary.

• - body.stl — all 28 tile bodies in the same layout (filament A).

• - pips.stl — all 28 pip + line plugs in the same layout (filament B).

• - domino_set.scad — parametric source. Single-tile mode via

•   -D 'part="single_body"' -D 'left=N' -D 'right=M'lets you reprint

•   any face. All dimensions parameterised at the top of the file.

Print

• Layer height: 0.2 mm.

• - Walls: 3.

• - Infill: 15 % (tiles are thin; infill barely matters).

• - Supports: none — tiles are flat slabs, pips are recessed.

• - Orientation: Auto-orient in Bambu Studio picks the flat layout

•   correctly. Layout is ~231 × 102 mm so it fits the A1 mini bed.

• - Print time: ~2.5 h on Bambu A1 / X1C at 0.2 mm.

Material

PLA is fine. The accent (pips) is a few grams of contrasting

filament — gold-on-black or white-on-blue both look great.

License

CC BY — fork it, scale it, share what you make.