Smiley - The Self-Balancing Robot

Print Settings ⚙:

Supports: No (only if you use the assembly orientations)

Infill (Only for weight): Minimum 80% but more is okay

Infill (For everything else): Does not matter

This is the weight. Make sure the infill is at least 80% ⬇

Assembly:

Step 1:

Insert the head into one of the frame pieces.

Step 2:

Stick the weight into the shaft.

Step 3:

Snap the last frame piece onto the other side

(it may take some effort. be careful! But squeeze it hard.)

Enjoy! 😁

Happy Printing!!!