April 18, 2022
Description
Based on my Pokeball design: https://www.thingiverse.com/thing:3147999
Easy to print and assemble Hisuian Pokeball (Pokemon Arceus)
All parts are printed separately and placed together. The ring in the middle can be any colour and is just there to position the other parts. Everything just slots together.
Glued to stay together permanently, the button should be glued in as it does not stay in on it's own. You can scale the internal ring in the z direction to change the tolerance and make a tighter fit.
100% size is 40mm
Top and bottom should be printed at low layer height, I used 0.15mm. other parts can be any layer height. I used wood filament for the bottom
License:
Creative Commons — Attribution
MegaAndy
