Infinity Cube — Animal Fidget (folding magic cube, 48 engraved animals, two-colour)

Infinity Cube — animal fidget (folding magic cube)

A classic infinity cube (magic / folding cube): eight cubelets joined by

hidden pivoting links so the whole thing folds end over end and **everts back

into a cube**, over and over. Every one of the 48 outer faces carries a

different animal silhouette, so a new creature keeps turning up as you fold.

Prints fully assembled — no gluing

The links are captured inside the cubes by geometry alone (a bar that rides

inside a bored pocket and exits through a slot narrower than the bar). No living

hinges to snap, nothing to glue — it comes off the plate already a working cube.

Reprinted and confirmed everting on a real machine (see the photo of all

eight cubelets opened into the full ring).

Two-colour animals (optional)

Two STLs:

• infinity_cube.stl— the eight-cube body with the animals recessed into every face

• - infinity_cube_inlay.stl— just the animal silhouettes, sized to drop into those recesses

Print the body alone and the animals read as clean recessed engravings in one

colour. For the two-colour look in the photos: Import infinity_cube.stl,

then Import infinity_cube_inlay.stlinto the same plate — they share

coordinates so they land perfectly registered (**don't move them**). Assign the

inlay a contrast filament and slice. With 48 faces that's a lot of swaps, so

single-colour also looks great.

Print settings

• 0.2 mm layers, 3 walls, 15 % infill, PLA or PETG.

• - Supports: ON — the captured links need support under the bored pockets;

•   auto-supports tear out easily afterwards.

• - Work the cube a few times once cool to free the links.

Credit

The folding mechanism is ported from Jan Pieper's "Sturdy Infinity Cube"

(MIT licence, STLs CC-BY-4.0). Thank you to Jan Pieper for the field-proven link

design. The animal engravings and two-colour inlay are added on top.