Dummy 13 VF-25F

Macross Frontier VF-25F adapted for Dummy 13.

It can transform into all three modes: Battroid (Robot), Gerwalk (Hybrid) and Fighter (Plane).

Printing:

Print all parts with ABS/ASA/PETG. Do not print with PLA.

Most parts requires supports and brim.

Building instructions:

Use needle-nose pliers to help fit the pieces together.

For loose joints: apply a thin coat of clear nail polish or super glue.

For rigid joints: sand the pin or the male end of the joint.

1 - Head

2 - Right arm

3 - Repeat for the left arm

4 - Foot

5 - Repeat for the other foot

6 - Right leg

7 - Repeat for the left leg

8 - Torso

9 - Torso + legs + arms + head

10 - Back + right wing, then + left wing

11 - Final step

Reference images for painting:

Macross Wiki: https://macross.fandom.com/wiki/VF-25F_Messiah