Suguru Geto - Jujutsu Kaisen (anime)

This 3d model was generated using AI!🤖.

The print was tested on a P1S. Please consider adding extra supports to sleeve!

Corrections were made in Blender, fixing some details and making the model printable.

The model is divided into two parts: the main body and the left hand.

The supports should be removed carefully, especially on the back of the hair since it’s slightly pointy (I tried to round it out, but it can still be fragile if pulled too hard). I included photos showing how it might look. It’s not terrible by any means, but if you’re very detail-oriented, keep this in mind.

Suguru Geto
He is a character from the anime and manga Jujutsu Kaisen. Suguru Geto is a major character in the series, known for his transition from a highly skilled jujutsu sorcerer to one of its central antagonistic figures.

Print Instructions

General Print Settings

• Nozzle: 0.4 mm

• Layer Height: 0.16 mm (Bambu High Quality profile)

• Wall Loops / Perimeters: 2

• Detect Thin Walls: Enabled

• Infill: 15% Gyroid

• Material: PLA+

Support Settings

• Support Type: Tree Support

• Support Angle: 23°

• Support Placement: On build plate only