Super twisty Oreo spinner (reupload)

This is the link to the model:

https://makerworld.com/en/models/500008-super-twisty-oreo-spinner?from=search#profileId-414924

This is the description of the model:

Description

Twist this cookie the same way that you would twist an actual Oreo! The clicky result is super satisfying.

This model is based on the original Super Clicky Oreo Spinner by JamesThePrinter. I made two significant changes:

First I altered the dimensions of the cream filling part to more realistically represent an actual Oreo cookie.

I also re-designed the center gear to allow for the twisting motion.

Assembly

1. Start with one wafer upside-down. Then glue the filling ring to the wafer. The ridge on top of the ring should be facing up.

2. Assemble the two halves of the center gear. The top of the gear has a small indentation where the two halves connected. If you twist the two halves, the teeth of the gear should move with the top surface.

3. Glue the gear to the upside-down wafer in this orientation.

4. Glue the remaining wafer to the top surface of the gear.