Gameboy Advance (GBA) Case for 4 Games - Harry Potter (SC)

Family needed some cases for GBA games, I wanted to do something that that works like a CD cover. Here you are :)

This is the 3dd one and has a Zelda sketch on the top. More to come with some symbols.

If you're interested in this one, you might want to check these, too:

https://www.prusaprinters.org/prints/16744-gameboy-advance-gba-case-for-4-games-zelda
https://www.prusaprinters.org/prints/16625-gameboy-advance-gba-case-for-4-games-yoshi
https://www.prusaprinters.org/prints/16549-gameboy-advance-gba-case-for-4-games

Print instructions

Category: Games Print Settings

Printer Brand: Prusa

Printer: i3 MK3

Rafts: No

Supports: Yes

Resolution: 0.2mm

Infill: doesn't matter

Filament: Das Filament PLA Kirschrot (cherry red), Sonnengelb (sunny yellow)
Notes:

• Load HarryPotter.stl on your print bed and don't move it.
• Print HarryPotter.stl in the color of your choice.
• After the print has finished, remove everything that isn't the Golden Snitch (nozzle clean stripe, skirt, the outline of the case, that helps to align everything)
• Change filament to the color your case should be
• Load GbaCartridgeHolder_4_slots_2-Top_HarryPotter-Body.stl and don't move it.
• Print GbaCartridgeHolder_4_slots_2-Top_HarryPotter-Body.stl.
  I tested everything with 9-point calibration and didn't had problems.