Monopoly Deal Box

A box to hold cards for the game: Monopoly Deal

Provided are a box and lid to hold the large deck of cards in Monopoly Deal. If you fold the instructions in half, they will also fit inside the box.

I printed with 0.4 Nozzle in PLA @ 0.2 for the lid and 0.3 for the box. However, at the top of the box I used variable layer height to get an accurate joint. This allows the box to be printed quicker because of the 0.3 layers, but at the top where I want more precision, the layer height varies down to 0.7 to get better accuracy. I provided the EMF files so that if you have Prusa Slicer and an MK3S+, the settings are done for you. The box took about 3 hours and the lid 1.

Print the box with bottom down and lid with the image facing up. 

The EMF for the lid also has a filament change built in so you can get the image and text in a different color.

In the box, and on the lid is a 3x3mm hole for a magnet. This gives some hold to the lid in case it loosens up and wants to slid off. If you choose to install, get two 3x3mm magnets and glue into the opening.