Printed Tempo (Twisted Tempo - Beyblade)

This "Printed Tempo" is a Replica of the Legendary Twisted Tempo from Beyblade!
The Model is made to be Backwards Compatible with Most Beyblade Component.
This Beyblade has the ability to be launched Clockwise or Counter-Clockwise.
The Beyblade launcher can launch this Beyblade and the real ones. The Beyblade Launcher is a Clockwise Launcher.

The 3mf files if imported as a Project has the settings and infill set but if you import it without those settings I suggest 100% infill for most parts and Supports on "everywhere."

I printed the Whole thing out of PLA and it works great without failure/fracture. However heavier and stronger materials should have the top will perform better.

The the 3mf File "Printed Tempo" is the Beyblade Assembly Set with a Installation Tool.
The installation tool is to help twist the Face Bolt and the Performance Tip into Place.
Both the Face Bolt and the Performance Tip are right hand thread (Clockwise to install, Counter to Uninstall).  Also don't torque the Beyblade with all your might. It only takes a little force to put the Beyblade together. I can do it with my figures, but the installation tool helps (I got rid of the Handle on the Installation Tool to help minimize that torque production).

The 3mf File "Beyblade Launcher Type 1-1" is the Launcher for the Beyblade It requires press on assembly and is very easy to build. The Beyblade Launcher Type 1-1 uses a Clock Spin that stops the Transfer Axle once the Rip Cord is pulled out. Ensuring all rotational momentum is transferred to the top. For Assembly place the Clock Spring (Watch for the Indicator) and the Transfer Axle in the Top of the Launcher and Sandwich them with the Bottom Piece of the Launcher. Afterwards press the Top Mount onto the exposed Square Axle sticking out of the Launcher.
The Assembled Launcher has a indicator for which direction it must be used.  The Beyblade Launcher is a Clockwise Launcher.

Hopefully you guys enjoy this and I will see you in the Ring.

This Top meets Open Sauce Competition Rules by having a Attack Ring Reach 25mm from the Ground, a diameter <91mm, and having a Rip Cord Length of 220mm or <270mm)

Spin Durability: 1:00 minute on a average pull and rough wood flooring.