Prusament Top with Launcher (3 Sizes)

This is a Prusament Spinning Top!
Print and Battle your Friends with a Roll of Plastic and really show them who is Boss!

There are  3 sizes (1kg - Beyblade size, 2kg - Medium Size, 3kg - Open Sauce Maximum Size

The Model is made to be Backwards Compatible with Most Beyblade Component.
This Top has the ability to be launched Clockwise or Counter-Clockwise.
The Top launcher can launch this Top and other Beyblades. The Launcher is a Clockwise Launcher.

The 3mf files if imported as a Project has the settings and infill set but if you import it without those settings I suggest 100% infill for most parts and Supports on.

I printed the Whole thing out of PLA and it works great. However heavier and stronger materials should have the top perform better.

The the 3mf Files "1Kg Prusament Top", "2Kg Prusament Top", or "3Kg Prusament Top" is the Top Assembly Set with a Installation Tool.
The installation tool is to help twist the Face Bolt and the Performance Tip into Place (only 1Kg Top).
Both the Face Bolt and the Performance Tip are right hand thread (Clockwise to install, Counter to Uninstall).  Also don't torque the Beyblade with all your might. It only takes a little force to put the Top together. I can do it with my figures, but the installation tool helps.

The 3mf File "Top Launcher 1-2" is the Launcher for the Top. It requires press on assembly and is very easy to build. The Top Launcher 1-2 uses a Clock Spin that stops the Transfer Axle once the Rip Cord is pulled out. Ensuring all rotational momentum is transferred to the top. For Assembly place the Clock Spring (Watch for the Indicator) and the Transfer Axle in the Top of the Launcher and Sandwich them with the Bottom Piece of the Launcher. Afterwards press the Top Mount onto the exposed Square Axle sticking out of the Launcher.
The Assembled Launcher has a indicator for which direction it must be used.  The Launcher is a Clockwise Launcher.

This Top meets Open Sauce Competition Rules by having a Attack Ring Reach 25mm from the Ground, a diameter <91mm, and having a Rip Cord Length of 220mm or <270mm)