April 24, 2022
Description
Fidget Finger Spinners
My take on finger spinners, with a simple and clean design. Made this using Fusion 360 for the first time.
Tri, Duo and Uno versions!
Uses 608 Ball Bearings (8mm core, a 22mm outer diameter and a 7mm width) commonly used in Skateboards.
If you're for extra spin time look for ceramic bearings!
Printer Brand:
RepRap
Printer:
Wanhao Duplicator i3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Assembly
The bearings should fit tight on the holes and ideally can be pressed in place with your hands and stay secure! If not adjust the scale up or down by 1% increments.
License:
Creative Commons — Attribution — Share Alike
Diogorsergio
