Gloomhaven - "Concentric Circle" Pets

Spoiler: if you haven't guessed yet, this class has several pets.

This is a collection of pets for the unlockable "Concentric Circles" character in the Gloomhaven board game. There wasn't a way to prevent spoiling the images, and if you want to avoid spoiling the pet's names, don't look at the file names.

This is a work-in-process. There's still several more pets to figure out - I'll add them as I remix things. (Managing multiple remixes in one project can be a challenge, currently the licenses can default to the share alike.) You may want to watch this, so you see future adds. If you have a high priority need/want for the future ones, direct message me, and I'll bump it up.

GhostWolf - the original Demon dog statue is pretty much untampered with - shrunk it to 20%, rotated it slightly for the paws to be in a flat alignment, then mounted it to a standard pet "keyfit" base.

Unicorn - needed some cleanup work. Shrunk it down, used Blender to close some air gaps in the mane, deleted loose parts, chopped off the original's base, and used the sculpting tool to make the horn thicker.

Voidwalker - resized it, playing around with x/y/z.

Living Bomb is testament to my own poor design skills. I was going to add a "splat" underneath it, like it was going to detonate...I was not making good progress.

The bases were a remix of a remix. chanson836 did everyone a solid for putting it out there. (Technically, I have some bases in Blender that I use for pets, so it would actually be remix^3.)

If you're going to tip as a thank-you for this project, please tip the original modelers. Thanks!

Update 2018.09.23: Added summons from the level 6 card, which generates 3 summons. (They are numbered.) I went back and numbered the wolves in the same manner (removed the un-numbered wolf). Once I get done with all of the summons, I'll post new pictures.

Print Settings

Printer Brand:

LulzBot

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

.5mm nozzle

Infill:

Notes:

The pictured GhostWolf was printed on clear PETG, and then given a light wash...about 50% lime green acrylic, 50% water. I'd recommend different colors/washes so you know which wolf is first to take their actions.

I put pink dials on the bottom, just in case there were multiple pet classes in play. (Pink for one, green for another, etc.)

How I Designed This

Nail Spheres were created by my novice hand - create icosphere, extruding a dozen faces by 2mm, extruding 2mm again and then scaling to zero to make the "spiky" tips.

I removed numbers from the bottom of the dial, and reused them to number the spheres and wolves.

Category: Toy & Game Accessories