Tinkerer Pet for Gloomhaven

Gloomhaven is awesome, but...let's replace the cardboard chits with something more interesting, right?

I found a nice wheeled mech under the Share Alike Creative Commons, and repurposed it.

The Mech a bit bigger. I mounted it to a 33mm Gloomhaven standee base that I had remixed. I cut the object in half, so we could avoid supports at the cost of having to glue them together afterward.

EXTRA (2017-11-19):

I came up with a "keyfit" option, to prevent the top coming loose from the dial. Basically a small spike on the bottom dial. The top "key fit" has a slot for the peg to go through and there's empty space for it to rotate around in the top. (But the spike can only come out when the top is aligned with the "X" on the dial.) No support needed.

ADDED (2018-08-26):

33-GH_keyfit_TinkererPet_uncut.stl - basically the front and back, so you can print it without gluing. It's a nicer fit, but the support scarring is tough to love.

REMOVED (2019-07-30):

I removed the HP extender. The pet never gets more than 10 HP. (If you need your Tinkerer Pet to have more than 10 HP, use the base and HP extenders from the original project.)

Print Settings

Printer Brand:

LulzBot

Printer:

Rafts:

Doesn't Matter

Supports:

Notes:

Can print without support, with the exception of the "uncut" model.

Category: Toy & Game Accessories