Dual 1/64 Need for Speed Hot Pursuit Display

Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068

Custom display base are also available from $5! Contact me to discuss what you want!

If you like my work, you can support me Printables Clubs! Just click the “Support & Join”  button beside my name or here: https://www.printables.com/@GigaPenguin#join:279  

Exclusive models are included too!

You can also support me through Patreon too: https://www.patreon.com/gigapenguin3dprints/posts

Description

The cars I used in the photos are Mini GT Pagani Huayra and Tarmac Works Lamborghini LP750-4 SV NFS Police. I used those 2 cars because I couldn't find a orange Zonda Cinque and police Reventon.

If you wish to have a display base tweaked to fit to a different car from a different brand, please send me these dimension for the display base holes: https://imgur.com/5T6mb2L

The display base is separated into 2 parts for easy printing and colour swap. The parts are:

1) Base (BaseV3.STL)
2) Flat Base (FlatBase.STL)

Print Settings

Nozzle size = 0.3 mm (Should be printable with 0.4)
Layer height = 0.28 mm (I set to 0.28mm just to print it faster)

Filament change layer for colours on "FlatBase.STL":
1) Start (Lines on the road, mine is in white)
2) Layer 4 (Road colour, mine is in black)
3) Layer 6 ("NEED FOR SPEED" lettering and NFS logo colour, mine is in white)
4) Layer 10 ("HOT PURSUIT" colour, mine is in red)

Assembly

The car is tied by wires through the hole in the base

Flat base will need to be glued or double sided tape on to the base, the flat base will fall off if there is no glue or tape.

Others

Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.

I can be contacted through Instagram or Twitter too:

Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/