Crokinole 4 player box

This is a cribbage-inspired box I made to hold my crokinole disks printed in white at .2mm layer height. There's a point tracker on the lid along with a round/game tracker at the top. The holes are sized for the pegs in the project, which I included as a single item because I printed mine in several different colors of filament to match my disks. These are for standard 32x10mm disks, 12 of each color. I toss a little baggie of wax inside the 20's holder.

Update:

As one commenter noted, on the original design the magnets are a big weak to hold the lid on well. I've updated the model to take 8 6mmx3mm disc magnets which should hold a lot better. You will need a total of 16 magnets, 8 for the lid and 8 for the base.  I also added an extra 0.05mm to the diameter to make installation a little easier.

The lid and box both on the original model have four holes each sized for 4mm diameter by 2mm thick neodymium round magnets and are fairly snug so they shouldn't need glueing, though they will take some force to fit in.

Everything was printed in the orientation it's included in and nothing needs supports except the 20's holder tube which doesn't need supports but it might help.

The color on the inlay was painted in but the numbers and design are recessed so a filament change a few layers before the top should make everything easier to read. The gold box poking it's head out was the first iteration of this design and isn't a part of this project.

Category: Games