April 30, 2022
Description
You can print coins with or without multi material. Multi material models are marked "MM".
layer height : 0,20 mm
nozzle diameter : 0,40 or less
Instructions without multi material:
1. slice and print the part marked xx_x.1 (look at the photo)
2. leave the model on the bed (remove the skirt and extrusion line)
3. replace the filament
4. slice and print the part marked xx_x.2 at the same coordinates (look at the photo)
5. enjoy
License:
Creative Commons — Attribution — Noncommercial
fifo182
