January 21, 2020
Description
I wanted a trolley to allow my daughter to put her Lego friends shops on. I had three 'retro' 10x10 road baseboard from the 1980s so I supplemented these with a green baseboard to make a 2 x 3 arrangement.
There are a few parts to this trolley:
Corner piece v1.0 - This is the corner fitting that you screw the wooden batons and the castors to.
Corner brace - Technically you don't need these, but they make the joints strong and square.
Lego clips (0mm and 2mm) - These allow you to hold down the base boards to the wooden batons. I designed two to allow any slack to be taken up.
Links to parts you need:
25mm x 4mm countersunk screws x 60+
34mm x 44mm planed timber (lengths to suit what size trolley you need)
Lego base plate: https://www.amazon.co.uk/dp/B00NVDOH2U/ref=cm\_sw\_em\_r\_mt\_dp\_U\_Mu9yDbSKRSSX5
25mm castors: https://www.amazon.co.uk/dp/B07D7VGR1F/ref=cm\_sw\_em\_r\_mt\_dp\_U\_yv8yDbF770T5S
Printer Brand: Prusa
Printer: i3 MK2.5
Rafts: No
Resolution: 0.2mm
Infill: 15%
Designed on Fusion 360
License:
Creative Commons — Attribution
Ledeev001
