April 30, 2022
Description
This was made for my niece who love playing with bubbles. The bubbles it makes regularly exceed a foot in diameter. It seems to work best when waved in the air.
The wand measures 100mm wide (about 4"). The bowl has a pour spout to make it easier to pour the remaining solution back into the bottle.
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Yes
Supports:
Yes
Resolution:
0.16 - 0.2
Infill:
15+
Filament: Inland PLA Any
Notes:
The wand should be printed with a raft since the comb may have issues adhering to the print bed. I printed with 12.5% support on Cura for the handle.
Tip - In Cura the default raft margins are absolutely ridiculous at 15mm. Reset them to 3-5mm to waste less plastic and cut down print times.
The bowl didn't need any support or raft. The lettering turned out fine without support.
I used 15% infill with 3 perimeters with 0.4mm nozzle (1.2mm) for both items.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
ericsnis
